![\"\"](\"https:\/\/www.frankforged.com\/forge\/images\/cars\/96camaro\/operationx\/IMG_20170702_193845936_HDR_1024px.jpg\")
<\/a><\/p>\n <\/p>\n My Sub woofer enclosure is coming along slowly.<\/p>\n Sound deadener installed:<\/p>\n Fiberglass prep:<\/p>\n Fun stuff:<\/p>\n Once cured I started trying to figure out how to make the top half of the enclosure. So, I lined up the panels and used a laser to make a few things<\/p>\n I then used quite a bit of foam and glue them all together then shaved it down until it fit in the hole. (I want to be able to remove it just in case i need to repair or maybe paint it.<\/p>\n Finally fits:<\/p>\n I didn’t really know where I was going to put the amps and stuff but there seems to be a bunch of room behind the enclosure.<\/p>\n After the new tire was on, I suspected that it was rubbing a little. I was correct. I think it’s just because the bump stops are doing their job lol so time to fix that.<\/p>\n Rubbing:<\/p>\n Bump stops! You failed me!<\/p>\n Traded in for younger models.<\/p>\n This was probably long overdue.<\/p>\n And because there is no direct replacements, cut, cut, cut.<\/p>\n The otherside was a bit worse. I have been hanging the left turns a bit hard apparently. lol<\/p>\n All done.<\/p>\n Now for the more recent problem or inconvenience more or less.<\/p>\n I’m working on getting the rest of the Supercharger parts on the shelf. I want to pull this motor and redo all the gaskets and anything else that looks like it needs replacing<\/p>\n I noticed that my Timing Chain was making more noise than usual. I’ve been unable to stop the noise completely since I install the Cam but this was louder.<\/p>\n Back in the air it goes.<\/p>\n The usual breakdown:<\/p>\n Turns out there was a slight problem. I found other pieces of it in the oil when i drained it. I think this is the original tensioner only because none of the other tensioners felt like they fit properly. So I bought a Sealed Power version and it looks the closest to the factory. It still fits a little weird but I think it will to the job.<\/p>\n I took the opportunity to clean some of the parts because my PS pump line was leaking some and made a mess all over everything.<\/p>\n This part was painted and I think when I SC i’m going to polish parts instead of painting them. I decided to strip the paint off this and clean it up a bit.<\/p>\n Looks decent.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n