I’m getting the PD tore down because both of the front Bearing have some not-so-smooth feeling. I planned to upgrade them to ceramic anyway so it’s no big deal.
On another note, I’ve been trying to tune and I have a pretty annoying problem with my trim maxing out when I’m at cruise under 60mph. I know it learns this because I reset my trim and it doesn’t do it right away. but it will if I drive about 10 minutes.
So I bought new MAP and MAF sensors but It did not change the problem.
Next step is going to be the less than 1 year out o2 sensors. I don’t know where to go from there. I haven’t even started tuning because I can’t run it in close loop because of this. I’m running a stock tune.